Specifications

Receiver

AM/FM Stereo Codem D	Digital signal processing starting at 10.7 MHz
SHARX	Fast station access Automatic bandwidth setting
RDS	Demodulation, decoding, error-correction, block synchronization
Usable sensitivity	4.5 - 6 dBuV
Selectivity (+/- 200 kHz) w/o SHARX	65 dB
Selectivity (+/- 200 kHz) w SHARX	>90 dB
Signal-to-noise ratio stereo/mono	56/59 dB
Stereo channel separation (1 kHz)	>45 dB
Stereo THD (large FM input signal)	<0.1%
RDS sensitivity (typical)	16 dBuV

Integrated Features

Sound shaping (DPE)	2-band parametric equalizer Bass/treble/loudness
Digital input processing	Standard audio interface for digital sources (CD,MD), sample frequency 32 - 48 kHz Communication with external DSP
Analog inputs	Cassette/AUX

Optional External Components

DSP (Digital Sound Processing)	7-band graphic equalizer Masking of driving noise Dynamic compression Traffic Information Memory
Hardware	Short wave Background receiver
Software	DCF77 atomic clock signal decoding

(Not all features available in every model of radio)

Additional benefits of the two chip DigiCeiver are improved production and quality, due to the reduction of components used by 200 and alignment points reduced to 4, compared to conventional Blaupunkt receivers. This allows the tuner to be independent of component tolerances and temperature behavior.

1219 S. Main St.
Gainesville, FL 32601 USA
(352) 377-6604
fax (352) 377-2218
Bosch Authorized Service Center

Copyright © 2001 by Continental Imports - All Rights Reserved

Site Designed & Created by Scott Brotherton

Technical difficulties should be reported to
contimpo@continentalimports.com
and could save you 2%
on your purchases.