HOW THE DVC COAXIAL WORKS The performance requirement is simple - to get more bass into the car you must push a woofer
cone harder. This can be done by either [1] additional full ranged audio power (20- 20kHz) or by [2] adding more electrical bass signal to a second coil winding on the woofer cone.
The Blaupunkt DVC coaxials starts with a conventional coax speaker (using sizes above 6.5" only). A second voice coil is added to the woofer cone with a second set of terminals exiting the basket for this coil. This configuration creates a speaker with two sets of terminals with one set driving the woofer/midrange/tweeter and the second set driving the woofer cone only. This second set is recommended to be driven by a dedicated subwoofer amplifier of higher power than the coax signal.
DVC COAXIAL INSTALLATION nicely complements such a system and
provides remarkably good overall performance. A DVC coax system will NEVER replace the performance of a dedicated 12 inch woofer in a box but it will offer bass response that a conventional coax will
never be able to provide on its own.
DVC SUBWOOFERS| Blaupunkt Sales | | Blaupunkt Products And Service | Becker Products And Service | | VDO Instruments | E-mail Us | Home | |